- Timber window profiles

:: Simple processing :: Components :: Thermal calculation :: environmental / quality / delivery service

LongLife timber window profiles with proven double-vacuum oil impregnation (with depth effect) result in a high-quality and reasonably priced timber window in new design. They are available in different timber species e.g. spruce, pine, larch, oak, as well as with different finger joint distances (20 cm +/50 cm +).

PROFILE DESCRIPTION

Timber species:

Spruce, pine, larch, oak - Annual ring orientation quarter sawn/half quarter sawn (=vertical annual rings - advantages: surface with only few shakes and dimensionally stable)
3 times D4 laminated according to ift directives
Timber quality according to sorting criteria of Holz Schiller GmbH
Length: 6 m bars
Timber moisture content: 13 % +/- 2 %

Structure:

3 times laminated special structure according to ift Rosenheim directives for blind frames, wings and mullions.
Transom, blind frame bottom side also available with Purenit (rot-proof insulation material)

Construction/corner joints:

Based on DIN 68 121: double rabbet, rounded edges, corner joint as mitre or counter profile according to Stegherr system partner

Uncoupling of the functions guaranteed:

Stability of the corner joint is based on three pillars: Dowel connection + Hoffmann dovetail + Screw connection
Tightness of the corner joint due to high-tech nano particle hydrophobising + special polyurethane gluing

Ironmongery:

For all standard ironmongery (IV 68) with 13 mm distance between centre lines and EURO RABBET 24 mm

Gasket:

Circumferential, replaceable central gasket not subject to weathering as well as one gasket at the casement overlap

Surface:

Planed and finely polished, ground and smoothened
Industrial, water-bases surface treatment:
• Priming • Intermediate coat • Top coat